This image shows the top of a 1.5 gallon steel pail with a flexspout installed. To the left of the spout is the inner seal which remains in the spout until the end user removes it. To the top of the spout you can see the grey cap that can be reapplied to the spout.
|1.5 Gallon 2KC120 Gray Steel Round 24 GA
UN Rating: UN1A1/X1.5/250
Opening: Tight Head Rieke Opening
Our 1.5 gallon gray steel pail with an olive drab phenolic lining is a tight head pail with a Rieke opening. It has a hole covered with a dust cap. Pails are shipped empty, with the dust cap on, so they remain clean. The end user fills the pail and then crimps on a Rieke Flexspout (sold separately). A Rieke Flexspout is a retractable plastic pour spout which offers a reliable and tamper evident seal. When the spout is closed, it has a low profile for ease of stacking. The tamper evident cap has a pull tab for fast removal. Once the Flexspout is crimped on, and before the first use, the cap is pulled off the spout and cannot be reattached. To use the pail, simply pull up the spout, dispense your product and reclose. UN1A1/X1.5/250
|70mm Flexspout Plastic Round Flexspout
Opening: 70mm Flexspout
Rieke Flexspouts must be crimped onto the steel pails with Rieke openings. This is done with a Flexspout crimping tool sold separately.