The flexspout is shown here flat in it’s normal shipping (pre use) state. To open the spout, the two tabs on either side are lifted and the spout is pulled upward. After the spout is extended, the cap is twisted off like a normal screw cap.
|1.5 Gallon Green Phenolic Gray Steel Round 24 GA
UN Rating: 1A1/Y2.0/200
Opening: Tight Head Rieke Opening
Our 1.5 gallon gray steel pail with a green phenolic lining is a tight head pail with a Rieke opening. It has a hole covered with a dust cap. Pails are shipped empty, with the dust cap on, so they remain clean. The end user fills the pail and then crimps on a Rieke Flexspout (sold separately). A Rieke Flexspout is a retractable plastic pour spout which offers a reliable and tamper evident seal. When the spout is closed, it has a low profile for ease of stacking. The tamper evident cap has a pull tab for fast removal. Once the Flexspout is crimped on, and before the first use, the cap is pulled off the spout and cannot be reattached. To use the pail, simply pull up the spout, dispense your product and reclose.
| Natural Plastic 70mm Flexspout Flexspout
These Rieke Flexspouts must be crimped onto the opening of compatible containers. The crimp on tool is sold separately.